Release : 1.1f 857 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
31.26 ipv6 ospf retransmit-interval
This command sets the time between LSA retransmissions for adjacencies belonging to interface.
The no form of the command sets the default retransmit interval for an interface.
ipv6 ospf retransmit-interval <interval>
no ipv6 ospf retransmit-interval
Mode
Interface Configuration Mode
Defaults
interval - 5
Example
SMIS(config-if)# ipv6 ospf retransmit-interval 10
The retransmit time interval is the number of seconds between the link-state advertisement
retransmissions for adjacencies belonging to an interface. The retransmit-interval value is also
used while retransmitting database description and linkstate request packets.
Related Command
show ipv6 ospf interface – Displays the OSPFv3-related interface information
To Next Page
Loading...
