Release : 1.1f 527 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
21.1 set ip dvmrp
This command enables / disables DVMRP in the switch.
set ip dvmrp { enable | disable }
Syntax Description
enable - Enables DVMRP in the switch
disable - Disables DVMRP in the switch
Mode
Global Configuration Mode
Defaults
disable
Example
SMIS(config)# set ip dvmrp enable
If DVMRP is disabled on an interface, the DVMRP parameters return to their default values.
Related Commands
set ip dvmrp - interface – Enables/disables DVMRP on the interface
show ip dvmrp – Displays the DVMRP details
To Next Page
Loading...
