Release : 1.1f 164 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
5.8 logging file
This command enables logging of syslog messages in to a file. The no form of the command
disables file logging.
The log file is stored in ASCII text format.
logging file <filename> max-entries <short (1-8000)>
no logging file
Syntax Description
filename - Name of the file to which syslog messages are written
max-entries – Maximum number of syslog messages that can be written on the file. Once this
number is reached the file wrapped to overwrite the oldest entries.
Mode
Global Configuration Mode
Defaults
File logging is not enabled.
Example
SMIS(config)# logging file sw1_log max-entries 5000
Related Command
show logging - Displays Logging status and configuration information
show logging file - Displays syslog messages stored on the file
To Next Page
Loading...
