Release : 1.1f 417 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
16.2.7 show ip dhcp relay information
This command displays the DHCP Relay Information.
show ip dhcp relay information [vlan <integer (1-4069)>] [<iftype>
<ifnum>]
Syntax Description
Vlan - VLAN ID
iftype - Interface type, can either be a gi, ex or qx ethernet interfaces
ifnum - Physical interface ID including slot and port number
Mode
Privileged EXEC Mode
Example
SMIS# show ip dhcp relay information
Dhcp Relay : Enabled
Dhcp Relay Servers only : Enabled
Server Ip Address : 40.0.0.4
Dhcp Relay RAI option : Enabled
Debug Level : 0x1
No of Packets inserted RAI option : 0
No of Packets inserted circuit ID suboption : 0
No of Packets inserted remote ID suboption : 0
No of Packets inserted subnet mask suboption : 0
No of Packets dropped : 0
No of Packets which did not inserted RAI option : 0
Related Commands
service dhcp-relay - Enables the DHCP relay agent in the switch
ip dhcp server - Sets the IP address of the DHCP server
ip dhcp relay information option - Enables the Relay Agent to perform any
processing related to relay agent Information Options
To Next Page
Loading...
