Supermicro SSE-G48-TG4 - Tacacs Use-Server Address

Release : 1.1f 275 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
12.2 tacacs use-server address
This command selects a server from the list of servers maintained in the TACACS client and
makes the TACACS client to use the specified server. The no form of the command disables the
configured TACACS active server.
tacacs use-server address<ip-address>
no tacacs use-server
Mode
Global Configuration Mode
Example
SMIS(config)# tacacs use-server address 10.0.0.100
Related Commands
show tacacs - Displays the statistical log information and server for TACACS client