Release : 1.1f 784 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
28.10 ipv6 hop-limit
This command configures the maximum hoplimit for all IPv6 packets originating from the
interface. The no form of the command resets the hoplimit to default value for all IPv6 packets
originating from the interface
ipv6 hop-limit <HopLimit (1-255)>
no ipv6 hop-limit
Mode
Interface Configuration Mode
Defaults
64
Example
SMIS(config-if)# ipv6 hop-limit 100
To Next Page
Loading...
