Release : 1.1f 159 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
5.3 logging ip
This command enables Syslog server and configures the Syslog Server IP address.
The no form of the command disables Syslog server and re-sets the configured Syslog server IP
address
logging <ip-address>
no logging <ip-address>
Syntax Description
ip-address - Host IP address used as a Syslog server
Mode
Global Configuration Mode
Defaults
Logging - on
IP address - None
Example
SMIS(config)# logging 12.0.0.2
Related Command
show logging - Displays Logging status and configuration information
To Next Page
Loading...
