Release : 1.1f 834 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
31.7 abr-type
This command sets the ABR (Area Border Router) type. The no form of the command sets the
default ABR type.
abr-type { standard | cisco | ibm }
no abr-type
Syntax Description
standard - Standard ABR type
cisco - CISCO ABR type
ibm - IBM ABR type
Mode
Router Configuration Mode
Defaults
standard
Example
SMIS(config-router)# abr-type cisco
Related Command
show ipv6 ospf - General Information – Displays general information about the
OSPFv3 routing process
To Next Page
Loading...
