Supermicro SSE-G48-TG4 - Link-Status-Tracking Group

Release : 1.1f 956 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
35.2 link-status-tracking group
This command creates the link status tracking groups. The no form of this command removes the
configured link status tracking groups.
link-status-tracking group <short(1-1024)>
no link-status-tracking group <short(1-1024)>
Syntax Description
group – Any number between 1 to 1024
Mode
Global Configuration Mode
Example
SMIS(config)# link-status-tracking group 1
Related Commands
show link-status-tracking – Displays the link status tracking feature information.