Release : 1.1f 343 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
15.7 set port gmrp
This command enables or disables GMRP on the port.
set port gmrp <interface-type> <interface-id> { enable | disable }
Syntax Description
interface-type - Interface type
interface-id - Interface ID
enable - Enables GMRP on the interface
disable - Disables GMRP on the interface
Mode
Global Configuration Mode
Defaults
enable
Example
SMIS(config)# set port gmrp gigabitethernet 0/1 disable
The value enable indicates that GMRP is enabled on this port in all VLANs as long as
GMRP Status is also enabled globally.
The value disable indicates that GMRP is disabled on this port in all VLANs; any GMRP
packet received will be silently discarded and no GMRP registrations will be propagated
from other ports
Related Command
show vlan port config - Displays the vlan related parameters specific for ports
To Next Page
Loading...
