Supermicro SSE-G48-TG4 - Debug Ipv6

Release : 1.1f 793 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
28.18 debug ipv6
This command enables IPv6 Trace. The no form of the command disables IPv6 Trace.
debug ipv6 {IP6|ICMP|UDP6|ND|PING6|Packet}
no debug ipv6
Syntax Description
IP6 - IP6 Trace
ICMP - ICMP Trace
UDP6 - UDP6 Trace
ND - Neighbor Discovery Trace
PING6 - PING6 Trace
Packet - Packet Trace
Mode
Privileged EXEC Mode
Defaults
Disabled
Example
SMIS# debug ipv6 IP6