Supermicro SSE-G48-TG4 - Ip Igmp Snooping Mrouter-Time-Out

Release : 1.1f 305 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
14.4 ip igmp snooping mrouter-time-out
This command sets the IGMP snooping router port purge time-out after which the port gets
deleted if no IGMP router control packets are received. The no form of the command sets the
IGMP snooping router port purge time-out to default value.
ip igmp snooping mrouter-time-out <(60 – 600) seconds>
no ip igmp snooping mrouter-time-out
Mode
Global Configuration Mode
Defaults
125
Example
SMIS(config)#ip igmp snooping mrouter-time-out 70
Related Command
show ip igmp snooping mrouter - Displays the router ports for all VLANs or specific
VLAN