Supermicro SSE-G48-TG4 - Ip Igmp Query-Max-Response-Time

Release : 1.1f 502 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
19.6 ip igmp query-max-response-time
This command sets the IGMP max query response value for the interface and the no form of the
command sets the max query response to the default value.
ip igmp query-max-response-time <value (1-255) seconds>
no ip igmp query-max-response-time
Mode
Interface Configuration Mode
Defaults
100
Example
SMIS(config-if)# ip igmp query-max-response-time 20
Related Commands
show ip igmp interface - Displays the interface configuration of IGMP