Release : 1.1f 564 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
22.28 show ip pim rp-set
This command displays the RP-set information.
show ip pim rp-set [rp-address]
Syntax Description
rp-address - Indicates the IP address of the Rendezvous Point (RP) for the listed PIM Sparse
group.
Mode
Privileged EXEC Mode
Example
SMIS# show ip pim rp-set
PIM Group-to-RP mappings
---------------------------
Group Address: 224.1.0.0 Group Mask: 255.255.0.0
RP: 20.0.0.1
Component-Id: 2
Hold Time: 120, Expiry Time: 00:01:43
It shows details of the Group Prefix, RP address, Hold time and Expiry Time.
Related Commands
rp-candidate rp-address – Enables the address of the interface, which will be advertised
as a Candidate-RP
set ip pim static-rp – Enables or disables the Static RP configuration Status
To Next Page
Loading...
