Release : 1.1f 846 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
31.16 host - metric/area-id
This command configures a host entry with metric and/or area-id. The no form of the command
deletes a host entry.
host <IPv6-Address> {metric <cost>} [area-id {<AreaID>}]
no host <IPv6-Address>
Syntax Description
IPv6-Address - IPV6 address prefix
metric - Metric to be advertised
area-id - A 32-bit integer
Mode
Router Configuration Mode
Example
SMIS(config-router)# host 3ffe:481d::5 metric 10 area-id 0.0.0.1
Related Command
show ipv6 ospf host – Displays the Host Table information
To Next Page
Loading...
