Release : 1.1f 423 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
16.3.4 ip dhcp bootfile
This command sets the boot file name in the DHCP server configuration parameters. The no form
of this command deletes the boot file name from the DHCP server configuration parameters.
ip dhcp bootfile <bootfile (63)>
no ip dhcp bootfile
Syntax Description
boot file - Name of the file that specifies the boot image
Mode
Global Configuration Mode
Example
iss (config)# ip dhcp bootfile 53
Related Commands
service dhcp-server - Enables the DHCP server
show ip dhcp server information - Displays the DHCP server information
To Next Page
Loading...
