Release : 1.1f 898 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
32.9 traffic class
This command sets weight and bandwidth for traffic classes.
The no form of this command removes the minimum and maximum bandwidth settings and resets
the weight to the default value 1.
traffic-class <integer(0-7)> weight <integer(0-15)> [minbandwidth
<integer(64-16777152)>] [maxbandwidth <integer(64-16777152)>]
no traffic-class [<integer(0-7)>] [weight] [minbandwidth]
[maxbandwidth]
Syntax Description
traffic-class - Configures cosq numbers
weight - Configures cosq weights
minbandwidth - Configures minimum bandwidth in kbps
maxbandwidth - Configures maximum bandwidth in kbps
Mode
Interface Configuration mode
Defaults
weight - 1
Example
SMIS(config-if)# traffic-class 1 weight 7 minbandwidth 1234
Related Commands
show cosq algorithm - Displays the CoSq algorithm used for the interface.
show cosq weights-bw - Ddisplays the CoSq weights and the bandwidth for the interface.
To Next Page
Loading...
