Supermicro SSE-G48-TG4 - Show Debug-Logging

Release : 1.1f 139 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
3.99 show debug-logging
This command displays the debug logs stored in file.
show debug-logging
Mode
Privileged EXEC Mode
Example
SMIS(config)# debug-logging file
SMIS(config)# exit
SMIS# debug spanning-tree events
SMIS# show debug-logging
AST: MSG: Timer Expiry Event processed...
AST: MSG: Completed processing the event(s).
AST: MSG: Timer Expiry Event processed...
AST: MSG: Completed processing the event(s).
AST: MSG: Timer Expiry Event processed...
AST: MSG: Completed processing the event(s).
AST: MSG: Timer Expiry Event processed...
AST: MSG: Completed processing the event(s).
AST: MSG: Timer Expiry Event processed...
AST: MSG: Completed processing the event(s).
AST: MSG: Timer Expiry Event processed...
AST: MSG: Completed processing the event(s).
AST: MSG: Timer Expiry Event processed...
AST: MSG: Completed processing the event(s).
AST: MSG: Timer Expiry Event processed...
AST: MSG: Completed processing the event(s).
AST: MSG: Timer Expiry Event processed...
AST: MSG: Completed processing the event(s).
Related Command
debug-logging - Configures where debug logs are to be displayed