Supermicro SSE-G48-TG4 - Show Ipv6 Pim Rp-Candidate

Release : 1.1f 599 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
23.25 show ipv6 pim rp-candidate
This command displays the PIMv6 RP-candidate information. It displays the Group addresses,
the Group Mask and the RP address that indicates the IP address of the Rendezvous Point (RP)
for the listed PIM Sparse group.
show ipv6 pim rp-candidate [ComponentId <1-255>]
Syntax Description
ComponentId - Component ID
Mode
Privileged EXEC Mode
Example
SMIS# show ipv6 pim rp-candidate 1
CompId GroupAddress/PrefixLength RPAddress/Priority
------ ------------------------- ---------- -------
1 ff02::e000:0/112 3333::a00:1/192
Related Commands
ipv6 pim rp-candidate rp-address – Sets the address of the interface, which will be
advertised as a Candidate-RP
ipv6 pim rp-static rp-address – Sets the address of the interface, which will be
advertised as a Static-RP