Release : 1.1f 875 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
31.42 show ipv6 ospf - request/retrans-list
This command displays the list of all link state advertisements (LSAs) in request-list or in
retransmissionlist.
show ipv6 ospf { request-list | retrans-list } [ <Neighbor-RouterID> ]
Syntax Description
request-list - The list of Link State Advertisements for which the neighbor has more up-to-
date instances.
retrans-list - The list of Link State Advertisements that have been sent but not
acknowledged.
Neighbor-RouterID - Neighbor router ID
Mode
User/Privileged EXEC Mode
Example
SMIS# show ipv6 ospf retrans-list
NeighborId 20.0.0.3, Nbr Address fe80::220:35ff:fe43:6020
Type LsId AdvRtr SeqNo Age Checksum
0x2001 0.0.0.2 11.0.0.2 0x80000011 0 0xcddf
SMIS# show ipv6 ospf request-list
Neighbor 20.0.0.3, Address fe80::220:35ff:fe43:6020
Type LSID ADVRTR SeqNo Age Checksum
8193 0.0.0.1 11.0.0.3 0x80000002 6 0x1211
To Next Page
Loading...
