Release : 1.1f 581 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
23.9 ip pim component
This command configures the PIMv6 component in the router and the no form of the command
destroys the PIMv6 component.
ip pim component <ComponentId (1-255)>
no ip pim component <ComponentId (2-255)>
Mode
Global Configuration Mode
Example
iss (config)# ip pim component 1
PIMv6 component 1 cannot be deleted as it is the default component.
The PIMv6 Component corresponds to each instance of a PIMv6 domain and classifies it
as Sparse or Dense mode.
Related Command
show ipv6 pim component- Displays the component information
To Next Page
Loading...
