Supermicro SSE-G48-TG4 - Ipv6 Rip Enable

Release : 1.1f 815 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
30.3 ipv6 rip enable
This command enables RIP Routing and the no form of the command disables the RIP Routing.
ipv6 rip enable
no ipv6 rip
Mode
Interface Configuration Mode
Example
SMIS(config-if)# ipv6 rip enable
Related Command
show ipv6 rip database – Displays IPv6 Local RIB and routing protocol information