Supermicro SSE-G48-TG4 - Show Ip Igmp Snooping Forwarding-Database

Release : 1.1f 329 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
14.23 show ip igmp snooping forwarding-
database
This command displays the multicast forwarding entries for all VLANs or a specific VLAN.
show ip igmp snooping forwarding-database [Vlan <vlan id>]
Syntax Description
Vlan - VLAN ID
Mode
Privileged EXEC Mode
Example
Single Instance
/* IP based */
SMIS# show ip igmp snooping forwarding-database
Vlan Source Address Group Address Ports
---- -------------- ------------- -----
2 12.0.0.10 227.1.1.1 Gi0/1, Gi0/3, Gi0/4
2 12.0.0.20 227.1.1.1 Gi0/1, Gi0/3, Gi0/4
2 12.0.0.30 227.1.1.1 Gi0/1, Gi0/2, Gi0/4
2 12.0.0.40 227.1.1.1 Gi0/1, Gi0/2, Gi0/
/* MAC based */
SMIS# show ip igmp snooping forwarding-database
Vlan MAC-Address Ports
---- ----------------- -----
2 01:00:5e:01:01:01 Gi0/2, Gi0/3, Gi0/4, Gi0/5
2 01:00:5e:02:02:02 Gi0/2, Gi0/3
Multiple Instance
SMIS# show ip igmp snooping forwarding-database
Switch cust1
Vlan MAC-Address Ports
---- ----------------- -----
2 01:00:5e:02:02:02 Gi0/2, Gi0/3, Gi0/5, Gi0/6