Release : 1.1f 639 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
25.17 ip rip authentication mode
This command configures authentication mode and key. The no form of the command disables
authentication.
ip rip authentication mode { text | md5 } key-chain <key-chain-name
(16)>
no ip rip authentication
Syntax Description
text - Clear text authentication
md5 - Keyed Message Digest 5 (MD5) authentication. More than one entry can be configured for
an interface
key-chain - The value to be used as the Authentication Key
Mode
Interface Configuration Mode
Defaults
No authentication
Example
SMIS(config-if)# ip rip authentication mode text key-chain asdf123
If a string shorter than 16 octets is supplied, it will be left- justified and padded to 16 octets, on the
right, with nulls (0x00).
Related Command
show ip rip – Displays IP RIP protocol database or statistics
To Next Page
Loading...
