Release : 1.1f 522 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
20.6 show ip protocols
This command displays information about the active routing protocol process.
show ip protocols
Mode
Privileged EXEC Mode
Example
SMIS# show ip protocols
Routing Protocol is rip
RIP2 security level is Maximum
Redistributing : rip
Output Delay is disabled
Retransmission timeout interval is 5 seconds
Number of retransmission retries is 36
Default metric is 3
Auto-Summarisation of routes is enabled
Routing for Networks :
10.0.0.0
30.2.0.0
Routing Information Sources :
Interface Specifi Address Summarisation :
Interface vlan1
Sending updates every 30 seconds
Invalid after 180 seconds
Flushed after 120 seconds
Send version is 1 2, receive version is 1 2
Authentication type is none
Split Horizon with poissoned reverse is enabled
Installs default route received
Originate default route
Interface vlan2
Sending updates every 30 seconds
Invalid after 180 seconds
Flushed after 120 seconds
Send version is 2, receive version is 2
To Next Page
Loading...
