Release : 1.1f 523 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
Authentication type is none
Split Horizon with poissoned reverse is enabled
Restrcts default route installation
Restricts default route origination
Routing Protocol is "ospf" Router ID 0.0.0.0
Number of areas in this router is 0 . 0 normal 0 stub 0 nssa
Routing for Networks:
Passive Interface(s):
Routing Information Sources:
Gateway Distance Last Update(secs)
Distance: (default is 121)
Routing Protocol is "bgp 0"
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
IGP synchronization is disabled
Neighbor(s):
Address
Routing Information sources:
Gateway Last Update
The information displayed by this command is useful in debugging routing operations.
Related Command
export ospf – Enables redistribution of Ospf area/External routes to protocol
To Next Page
Loading...
