Release : 1.1f 589 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
23.17 ipv6 pim dr-priority
This command sets the designated router priority value configured for the PIMv6 router interface.
The no form of the command sets the default designated router priority value for the PIMv6 router
interface.
ipv6 pim dr-priority <priority(1-65535)>
no ipv6 pim dr-priority
Mode
Interface Configuration Mode
Defaults
1
Example
iss (config-if)# ipv6 pim dr-priority 100
The DR sets up multicast route entries and sends corresponding Join/Prune and Register
messages on behalf of directly-connected receivers and sources, respectively.
Related Command
show ipv6 pim interface – Displays the PIMv6 interfaces of the router
To Next Page
Loading...
