Release : 1.1f 337 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
15.1 vlan
This command configures a VLAN in the switch and is also used to enter into the config-VLAN
mode. The no form of the command deletes a VLAN from the switch.
vlan <vlan-list>
no vlan <vlan-list>
Syntax
vlan-list – may be any VLAN number between 1 to 4069 or list of VLAN numbers. Multiple
VLAN numbers can be provided as comma separated values. Consecutive VLAN numbers can
be provided as ranges such as 5-10.
Mode
Global Configuration Mode
Defaults
vlan-id - 1
Example
SMIS(config)# vlan 4
Related Command
show vlan - Displays VLAN information in the database
To Next Page
Loading...
