Supermicro SSE-G48-TG4 - Show Ip Ospf - Database

Release : 1.1f 698 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
26.44 show ip ospf - database
This command displays OSPF Database summary for the LSA type.
show ip ospf [area-id] database { asbr-summary | external | network |
nssaexternal | opaque-area | opaque-as | opaque-link | router | summary
} [linkstate- id] [{adv-router <ip-address> | self-originate}]
Syntax Description
area-id - Area associated with the OSPF address range. It is specified as an IP address
database - Displays how many of each type of LSA for each area there are in the database
asbr-summary - Displays information only about the Autonomous System Boundary Router
(ASBR) summary LSAs
external - Displays information only about the external LSAs
network - Displays information only about the network LSAs
nssa-external - Displays information about the NSSA external LSAs
opaque-area - Displays information about the Type-10 LSAs
opaque-as - Displays information about the Type-11 LSAs
opaque-link - Displays information about the Type-9 LSAs
router - Displays information only about the router LSAs
summary - Displays information only about the summary LSAs
link-state-id - Portion of the Internet environment that is being described by the
advertisement. The value entered depends on the type of the LSA. The value must be
entered in the form of an IP address
adv-router - Displays all the specified router link-state advertisements (LSAs). If no IP
address is included, the information is about the local router itself
self-originate - Displays only self-originated LSAs (from the local router)
Mode
Privileged EXEC Mode
Example
SMIS# show ip ospf database summary
OSPF Router with ID (10.0.0.1)
Summary Link States (Area 33.0.0.12)
---------------------------------------
LS age : 300