Supermicro SSE-G48-TG4 - Page 697

Release : 1.1f 697 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
Opaque Area 0 0
Opaque AS 0 0
Total 3 0
SMIS# show ip ospf database self-originate
OSPF Router with ID (10.0.0.1)
Router Link States (Area 33.0.0.12)
---------------------------------------
Link ID ADV Router Age Seq# Checksum Link count
------- ---------- --- ---- -------- ----------
10.0.0.1 10.0.0.1 0 0x80000004 0x9d0e 48
SMIS# show ip ospf database adv-router 20.0.0.2
OSPF Router with ID (10.0.0.1)
Router Link States (Area 33.0.0.12)
---------------------------------------
Link ID ADV Router Age Seq# Checksum Link count
------- ---------- --- ---- -------- ----------
20.0.0.2 20.0.0.2 1 0x80000004 0xfa0 36
Network Link States (Area 33.0.0.12)
---------------------------------------
Link ID ADV Router Age Seq# Checksum Link count
------- ---------- --- ---- -------- ----------
40.0.0.2 20.0.0.2 1 0x80000001 0xce09 32
Related Command
summary-address – Creates aggregate addresses for OSPF