Supermicro SSE-G48-TG4 - Ip Igmp Snooping Port-Purge-Interval

Release : 1.1f 306 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
14.5 ip igmp snooping port-purge-interval
This command sets the IGMP snooping port purge time interval after which the port gets deleted
if no IGMP reports are received. The no form of the command sets the IGMP snooping port purge
time to default value.
ip igmp snooping port-purge-interval <(130 - 1225) seconds>
no ip igmp snooping port-purge-interval
Mode
Global Configuration Mode
Defaults
260
Example
iss (config)# ip igmp snooping port-purge-interval 150
Related Command
show ip igmp snooping globals - Displays the IGMP snooping information for all VLANs
or a specific VLAN