Release : 1.1f 135 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
3.95 debug-logging
This command configures where debug logs are to be displayed and the no form of the command
displays debug logs in the console.
debug-logging { console | file }
no debug-logging
Syntax Description
console - Debug logs are displayed in the Console
file - Debug logs are displayed in the file
Mode
Global Configuration Mode
Example
SMIS(config)# debug-logging console
Debug logs are directed to the console screen or to a buffer file, which can later be uploaded,
based on the input.
Related Commands
show debug-logging - Displays the debug logs stored in file
show debugging - Displays state of each debugging option
To Next Page
Loading...
