Release : 1.1f 814 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
30.2 ipv6 split-horizon
This command enables the split horizon updates and the no form of the command disables the
split horizon updates.
ipv6 split-horizon
no ipv6 split-horizon
Mode
Interface Configuration Mode
Example
SMIS(config-if)# ipv6 split-horizon
The value splitHorizon denotes that splitHorizon algorithm must be applied in the response
packets that are going out.
Related Command
show ipv6 rip database – Displays IPv6 Local RIB and routing protocol information
To Next Page
Loading...
