Release : 1.1f 354 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
15.16 switchport access vlan
This command configures the access vlan for the port. The no form of this command resets the
access vlan to the default management vlan 1.
switchport access vlan <vlan-id(1-4069)>
no switchport access vlan
Mode
Interface Configuration Mode
Defaults
vlan-id - 1
Example
SMIS(config-if)# switchport access vlan 3
Related Command
show vlan port config - Displays the VLAN related parameters specific for ports
To Next Page
Loading...
