Supermicro SSE-G48-TG4 - Mac-Address-Table Static Multicast

Release : 1.1f 347 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
15.10 mac-address-table static multicast
This command configures a static multicast MAC address in the forwarding database.
mac-address-table static multicast <aa:aa:aa:aa:aa:aa> vlan <vlan-id(1-
4069)> [recv-port <interface-type> <interface-id>] interface
([<interface-type> <0/ab, 0/c, ...>] [<interface-type> <0/a-b, 0/c,
...>] [port-channel <a,b,c-d>]]) [forbidden-ports ([<interface-type>
<0/a-b, 0/c, ...>] [<interface-type> <0/ab, 0/c, ...>] [port-channel
<a,b,c-d>]]) [status { permanent | deleteOnReset | deleteOnTimeout }]
no mac-address-table static multicast <aa:aa:aa:aa:aa:aa> vlan <vlan-
id(1- 4069)> [recv-port <interface-type> <interface-id>]
Syntax Description
aa:aa:aa:aa:aa:aa - Multicast MAC address
vlan - VLAN Identifier
recv-port - Received port's Interface type and ID
interface - Member Ports Interface type and ID. Interface can be of fastethernet type [or
gigabitethernet type]
<interface-type> <0/a-b, 0/c, ...> - Member Ports Interface type and ID. Interface
can be of gigabitethernet type [or fastethernet type]
port-channel - Port channel ID
forbidden-ports - Forbidden ports interface type and ID. Interface can be of fastethernet
type [or gigabitethernet type]
<interface-type> <0/a-b, 0/c, ...> - Forbidden ports interface type and ID. Interface
can be of gigabitethernet type [or fastethernet type]
port-channel - Port-channel ID
status - Status of the static multicast entry
Mode
Global Configuration Mode
Defaults
Status - permanent
Example