Release : 1.1f 153 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
4.5 Show stack switchid
This command displays the details of particular switch stacking member.
show stack switched <id>
Syntax Description
id –
switch identifier
Mode
Privileged EXEC Mode
Defaults
Stacking is disabled.
Example
SMIS# show stack switchid
Related Commands
stack – Configures switch identifier, priority and stacking ports.
show stack brief – Displays summarized stack information
show stack details - Displays stack details
show stack counters - Displays stack port statistics
show stack link status – Displays the stacking interface link status.
To Next Page
Loading...
