Release : 1.1f 41 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
3.4 login authentication
This command sets the authentication method for user logins and the no form of the command
sets the authentication method for user logins to default values.
login authentication { local | radius | tacacs}
no login authentication
Syntax Description
local - Local username database for authentication
radius - List of all RADIUS servers for authentication
tacacs - Terminal Access Controller Access Control System
Mode
Global Configuration Mode
Defaults
Local
Example
SMIS(config)# login authentication radius
Changing login authentication from default to another value may disconnect the telnet session
TACACS is an authentication program used on UNIX / Linux systems, few network routers and
other network equipment that allows access to a server or a managing computer to determine if
the user attempting to log in has the proper rights or is in the user database
Related Commands
username - Creates a user and sets the enable password for that user with the privilege level
no enable password - Deletes a user and disables enable password parameters
show system information - Displays system information
To Next Page
Loading...
