Supermicro SSE-G48-TG4 - Set Ip Igmp

Release : 1.1f 498 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
19.2 set ip igmp
This command enables or disables IGMP on the interface.
set ip igmp {enable|disable}
Syntax Description
enable - Enables IGMP
disable - Disables IGMP
Mode
Interface Configuration Mode
Defaults
disable
Example
SMIS(config-if)# set ip igmp enable
Related Commands
show ip igmp interface - Displays the interface configuration of IGMP