Release : 1.1f 763 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
27.52 show ip bgp info
This command displays the general info about BGP protocol.
show ip bgp info
Mode
Privileged EXEC Mode
Example
SMIS# show ip bgp info
Routing Protocol is "bgp 100"
IGP synchronization is disabled
Routing Protocol is bgp 100
Both more-specific and less-specific overlap route policy is set
Local Preference is 100
Non-bgp routes are advertised to both external and internal peers
MED Comparision is disabled
Metric is 0
Redistributing:static
Peer Table
Peer Address RemoteAS NextHop MultiHop
---- ------- -------- ------- --------
10.0.0.2 200 self enable
10.0.0.3 100 automatic disable
10.0.0.4 100 automatic disable
10.0.0.6 600 automatic disable
10.0.0.7 700 automatic disable
10.0.0.8 800 automatic disable
TCPMD5 Auth Table
Peer Address Password
---- ------- --------
10.0.0.2 qwert
10.0.0.3 asdfg
10.0.0.4 zxcvb
BGP Speaker Local AS number must be configured.
To Next Page
Loading...
