Supermicro SSE-G48-TG4 - Show Ipv6 Ospf - LSA Database

Release : 1.1f 882 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
31.47 show ipv6 ospf - LSA Database
This command displays the LSA information.
show ipv6 ospf [area <AreaID>] database [{router|network|as-
external|interprefix| inter-router|intra-prefix|link|nssa}]
[{detail|HEX}]
Syntax Description
Area - A 32-bit integer
database - Displays the number of each type of LSA for each area in the database
router - Router LSAs
network - Network LSAs
as-external - AS-External LSAs
inter-prefix - Inter-prefix LSAs
inter-router - Inter-router LSAs
intra-prefix - Intra-prefix LSAs
link - Link State LSAs
nssa - NSSA LSAs
detail - Displays the LSAs information in detail
HEX - Displays the LSAs information in hexadecimal format
Mode
User/Privileged EXEC Mode
Example
SMIS# show ipv6 ospf database
AreaId RtrId LsaType Age Seq# Checksum
0.0.0.0 11.0.0.1 0x0008 300 0x80000002 0x323f
0.0.0.0 11.0.0.2 0x0008 300 0x80000001 0xa426
0.0.0.0 11.0.0.1 0x2001 1 0x80000003 0x3b9a
0.0.0.0 11.0.0.2 0x2001 0 0x80000006 0x2fa2
0.0.0.0 11.0.0.2 0x2002 0 0x80000001 0x6081
0.0.0.0 11.0.0.2 0x2009 0 0x80000002 0x504c
SMIS# show ipv6 ospf database detail
Age: 300 Seconds LS Type: Link Lsa