Supermicro SSE-G48-TG4 - Show Redistribute Information Ipv6

Release : 1.1f 811 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
29.6 show redistribute information ipv6
This command displays the RTM6 RRD status for registered protocols.
show redistribute information ipv6
Mode
Privileged EXEC Mode
Example
SMIS# show redistribute information ipv6
Current State is enabled
ProtoName OspfAreaRoutes OspfExtRoutes
--------- -------------- -------------
local Disable Disable
static Disable Disable
rip Enable Enable
Related Command
export ospfv3 – Enables redistribution of OSPF area/External routes to the protocol