Supermicro SSE-G48-TG4 - Link-Status-Tracking

Release : 1.1f 955 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
35.1 link-status-tracking
This command enables or disables the link status tracking feature.
Link status tracking feature is disabled by default.
link-status-tracking {enable | disable}
Syntax Description
enable – Enables the link status tracking feature
disable – Disables the link status tracking feature
Mode
Global Configuration Mode
Defaults
disable
Example
SMIS(config)# link-status-tracking enable
Related Commands
show link-status-tracking – Displays the link status tracking feature information.