Release : 1.1f 825 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
31 OSPFv3
Open Shortest Path First (OSPF) is a link-state, hierarchical Interior Gateway Protocol (IGP)
routing algorithm.
OSPFv3 is the modified form of OSPF to support version 6 of the Internet Protocol. The
fundamental mechanisms of OSPF (flooding, DR election, area support, SPF calculations, etc.)
remain unchanged. However, some changes have been necessary, either due to changes in
protocol semantics between IPv4 and IPv6, or simply to handle the increased address size of
IPv6.
The list of CLI commands for the configuration of OSPFv3 are as follows:
ipv6 router ospf
router-id
area - stub/nssa
area - stability-interval
area - translation-role
timers spf
abr-type
area - default-metric value
area - default-metric type
area - virtual-link
ASBR Router
area - range
area - external summary address
redistribute
passive-interface
host - metric/area-id
no area
nssaAsbrDfRtTrans
To Next Page
Loading...
