Release : 1.1f 624 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
25.2 ip rip security
This command accepts/ignores RIP1 packets when authentication is in use and the no form of
the command sets the security level to its default value.
ip rip security { minimum | maximum }
no ip rip security
Syntax Description
minimum - Denotes that the RIP1 packets will be accepted even when authentication is in use
maximum - Denotes that RIP1 packets will be ignored when authentication is in use
Mode
Router Configuration Mode
Defaults
maximum
Example
SMIS(config-router)# ip rip security minimum
Related Command
show ip rip – Displays IP RIP protocol database or statistics
To Next Page
Loading...
