Release : 1.1f 408 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
16.1.2 renew
This command immediately renews the DHCP lease for the interface specified.
renew dhcp [{ vlan <short (1-4069)> | <iftype> <ifnum> }]
Syntax Description
vlan-id - VLAN Identifier
iftype - Interface type, can either be a gi, ex or qx ethernet interfaces
ifnum - Physical interface ID including slot and port number
Mode
Privileged EXEC Mode
Defaults
Disabled
Example
SMIS# renew dhcp vlan 1
VLAN interface must have an IP address assigned by the DHCP server
If the router interface was not assigned an IP address by the DHCP server, the renew
DHCP command fails and displays the following error message:
Interface does not have a DHCP originated address
Related Commands
ip address - Configures the current VLAN interface to dynamically acquire an IP address from
the DHCP server
show ip dhcp client stats - Displays the DHCP client statistics information
To Next Page
Loading...
