Supermicro SSE-G48-TG4 - Debug Ip Dhcp Relay

Release : 1.1f 416 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
16.2.6 debug ip dhcp relay
This command enables the debug level for tracing the DHCP Relay Module. The no form of the
command disables the debug level for tracing the DHCP relay Module.
debug ip dhcp relay {all | errors}
no debug ip dhcp relay {all | errors}
Syntax Description
all - All trace messages
errors - Trace error code debug messages
Mode
Privileged EXEC Mode
Defaults
Debugging is disabled
Example
SMIS# debug ip dhcp relay all
Related Commands
show ip dhcp relay information - Displays the DHCP relay information
show dhcp server - Displays the DHCP server information