Release : 1.1f 413 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
16.2.3 ip dhcp relay information option
This command enables the Relay Agent to perform any processing related to relay agent
Information Options. When this option is enabled, the agent will insert and remove DHCP relay
information in forwarded DHCP request messages to the DHCP server. The no form of this
command disables the insertion of relay information.
ip dhcp relay information option
no ip dhcp relay information option
Mode
Global Configuration Mode
Defaults
Disabled
Example
SMIS(config)# ip dhcp relay information option
Only when enabled, the Relay Agent does any processing related to Relay Agent
Information Options - like inserting the necessary options while relaying a packet from a
client to a server and examining/stripping of options when relaying a packet from a server
to a client.
Related Commands
show ip dhcp relay information - Displays the DHCP relay information
show dhcp server - Displays the DHCP server information
To Next Page
Loading...
