Release : 1.1f 491 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
18.9 show ip traffic
This command displays the IP protocol statistics.
show ip traffic
Mode
Privileged EXEC Mode
Example
SMIS# show ip traffic
IP Statistics:
--------------
Rcvd: 0 total, 0 header error discards
0 bad ip address discards, 0 unsupported protocol
discards
Frags: 0 reassembled, 30 timeouts, 0 needs reassembly
0 fragmented, 0 couldn't fragment
Bcast: Sent: 0 forwarded, 0 generated requests
Drop:
ICMP Statistics:
----------------
Rcvd: 0 total, 0 checksum errors, 0 unreachable, 0
redirects
0 time exceeded, 0 param problems, 0 quench
0 echo, 0 echo reply, 0 mask requests, 0 mask
replies,
0 timestamp , 0 time stamp reply,
Sent: 0 total, 0 checksum errors, 0 unreachable, 0
redirects
0 time exceeded, 0 param problems, 0 quench
0 echo, 0 echo reply, 0 mask requests, 0 mask
replies,
0 timestamp , 0 time stamp reply,
To Next Page
Loading...
