Release : 1.1f 602 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
23.28 show ipv6 pim rp-static
This command displays the static RP information.
show ipv6 pim rp-static [ComponentId <1-255>]
Syntax Description
ComponentId - Component ID
Mode
Privileged EXEC Mode
Example
SMIS# show ipv6 pim rp-static
Static-RP Enabled
CompId GroupAddress/PrefixLength RPAddress
------ ------------------------- ---------
1 ff02::1111:2222/64 3333::4444
Related Command
ipv6 pim rp-static rp-address – Enables or disables the Static RP configuration Status
To Next Page
Loading...
