Release : 1.1f 509 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
19.13 show ip igmp interface
This command displays the interface configuration of IGMP.
show ip igmp interface [Vlan <vlan-id> | <iftype> <ifnum>]
Syntax Description
Vlan - VLAN ID
iftype - Interface type, can either be a gi, ex or qx ethernet interfaces
ifnum - Physical interface ID including slot and port number
Mode
Privileged EXEC Mode
Example
SMIS# show ip igmp interface
vlan1, line protocol is up
Internet Address is 10.0.0.1/8
IGMP is enabled on interface
Current IGMP router version is 2
IGMP query interval is 125 seconds
Last member query response interval is 10 seconds
IGMP querying router is 10.0.0.1 (this system)
Fast leave is disabled on this interface
No multicast groups joined
vlan2, line protocol is up
Internet Address is 20.0.0.1/8
IGMP is enabled on interface
Current IGMP router version is 2
IGMP query interval is 125 seconds
Last member query response interval is 10 seconds
IGMP querying router is 20.0.0.1 (this system)
Fast leave is disabled on this interface
No multicast groups joined
Related Commands
set ip igmp - Enables or disables IGMP on the interface
ip igmp immediate-leave - Enables immediate leave processing on the interface
To Next Page
Loading...
